Toyota Landcruiser 75/76/78
Series Barn Door Cards
INSTALLATION GUIDE
Introduction
Precisely laser cut to suit the 75, 76 & 78 LandCruiser barn doors, these door cards are an aluminium replacement for Toyota’s stock wood panels.
Whether you’re replacing a damaged card or looking to upgrade to something more robust, these metal panels are easily installed within minutes using the provided nutserts and fasteners.
In addition to offering superior strength over the stock option, these panels can also serve as a sturdy base for modifying your vehicle. The 2.5mm 50552 grade aluminium can be used as a base for items such as a fire extinguisher.
Proudly Designed & Manufactured in Melbourne, Australia.
STEPS
1: Removing the rear door card
The first step in the installation process is to remove the stock door card. This is easily achieved by getting under the corner of the door card and gently pulling out to release the plastic retaining clips which hold it in place. Once the first clip is out, work your way around the panel until all 10 clips are released and the door card is free.
2: Inserting the nutserts
Using an M5 nutsert tool, install the provided nutserts* into the 10 holes where the plastic clips previously retained the door card. Depending on the stroke length, some nutsert tools may require that you re-thread the nutsert and compress it into the door multiple times for proper fitment.
Important: Before proceeding please make sure that the nutserts have been properly compressed and are seated securely into the holes.
*Please refer to your respective tools operating manual for instructions on how to install.
3: Fasten the panel
Using the provided M5 x 16 screws and shake proof washers, fasten the mounting panel onto your vehicle making sure every screw is in position before going around and firmly tightening everything down.
This image is of the mounting panel for our drop down table. It is uses the same mounting holes as the door card
4: Installing the small door card
To install the small door card, repeat steps 1 – 3 on the small door side installing the provided M5 nutserts into the holes where the factory door card clips in.
